WELL-PREPARED MTCNA CERTIFICATION COST - PASS MTCNA ONCE - PERFECT CHEAP MTCNA DUMPS

Well-Prepared MTCNA Certification Cost - Pass MTCNA Once - Perfect Cheap MTCNA Dumps

Well-Prepared MTCNA Certification Cost - Pass MTCNA Once - Perfect Cheap MTCNA Dumps

Blog Article

Tags: MTCNA Certification Cost, Cheap MTCNA Dumps, New MTCNA Exam Bootcamp, MTCNA Premium Exam, MTCNA Test Dumps Demo

Just imagine that if you get the MTCNA certification, then getting high salary and promotion will completely have no problem. At the same time, you will have more income to lead a better life and develop your life quality. Who will refuse such a wonderful dream? So you must struggle for a better future. Life is a long journey. It is never too late to learn new things. Our MTCNA Study Materials will never disappoint you. And you will get all you desire with our MTCNA exam questions.

The MTCNA exam is recognized globally and is a valuable certification for IT professionals who want to enhance their career opportunities. MikroTik Certified Network Associate Exam certification not only validates the knowledge and skills of candidates but also demonstrates their commitment to their profession. The MTCNA certification is the first step in a series of certifications offered by MikroTik, and it provides a strong foundation for professionals who want to pursue further certifications in the field of networking.

The MTCNA Certification is highly regarded in the networking industry and is recognized by many organizations worldwide. It is an excellent way for network professionals to demonstrate their skills and knowledge in MikroTik networking and to enhance their career prospects. MikroTik Certified Network Associate Exam certification is also a prerequisite for higher-level certifications, such as the MikroTik Certified Network Professional (MTCNP) and MikroTik Certified Routing Engineer (MTCRE) certifications.

>> MTCNA Certification Cost <<

Pass MTCNA Exam with Excellent MTCNA Certification Cost by ActualTestsIT

Passing the MTCNA Exam is a challenging task, but with ActualTestsIT MikroTik Practice Test engine, you can prepare yourself for success in one go. The MTCNA online practice test engine offers an interactive learning experience and includes MikroTik MTCNA Practice Questions in a real MTCNA Exam scenario. This allows you to become familiar with the MTCNA exam format and identify your weak areas to improve them.

MikroTik Certified Network Associate Exam Sample Questions (Q25-Q30):

NEW QUESTION # 25
Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?

  • A. Default Forward
  • B. Security Profile
  • C. Enable Access List
  • D. Default Authenticate

Answer: C


NEW QUESTION # 26
What is the minimal possible wireless configuration to create an Access Point?

  • A. band
  • B. ssid
  • C. radio name
  • D. WDS
  • E. mode
  • F. DFS mode
  • G. scan-list
  • H. frequency

Answer: A,B,E,H

Explanation:
To configure a MikroTik wireless interface as a basic access point (AP), the minimum required parameters are:
* Mode # Must be set to ap-bridge or bridge
* SSID # Defines the wireless network name to broadcast
* Band # Determines which frequency ranges are used (e.g., 2.4GHz b/g/n or 5GHz a/n/ac)
* Frequency # Specifies the actual channel used for broadcasting
Options reviewed:
* A. radio name ##Optional. A cosmetic label used to identify the radio in Winbox.
* B. scan-list ##Optional. Used to define which frequencies the interface should scan.
* C.#Required
* D.#Required
* E.#Required
* F. DFS mode ##Optional and auto-configured based on regulatory domain.
* G. WDS ##Only needed for bridging or extending networks.
Extract from Official MTCNA Course Material - Wireless Configuration:
"The minimal settings to enable an Access Point include: mode, SSID, band, and frequency. Without these, the interface won't broadcast." Extract from Rene Meneses Study Guide - Wireless Basics:
"To turn on an AP: Set the mode to ap-bridge, define SSID, band, and frequency. Other settings are optional or advanced." Extract from Terry Combs Notes - Wireless Setup:
"Essential: mode, frequency, SSID, band. Others like WDS and DFS are situational."


NEW QUESTION # 27
Bridging loops can be avoided by enabling:

  • A. ICMP filter
  • B. Connection tracking
  • C. UDP filter
  • D. STP protocol
  • E. RSTP protocol

Answer: D,E

Explanation:
Bridging loops occur when there are multiple active paths between switches or bridge interfaces, causing broadcast storms or MAC table instability. MikroTik RouterOS supports both STP (Spanning Tree Protocol) and RSTP (Rapid Spanning Tree Protocol) to detect and block redundant paths.
* A.#RSTP - Faster and preferred protocol to prevent loops.
* B.#STP - The original protocol, slower convergence but still effective.
* C.#Connection tracking - Not related to Layer 2 loop prevention.
* D.#UDP filter - Filters specific traffic types, doesn't handle loops.
* E.#ICMP filter - Not relevant to Layer 2 loop protection.
Extract from Official MTCNA Course Material - Bridging and STP:
"STP or RSTP must be enabled to prevent bridging loops. RSTP is the recommended version due to faster convergence." Extract from Rene Meneses MTCNA Study Guide - Bridging:
"Always enable STP or RSTP when using bridges with multiple paths to prevent Layer 2 loops." Extract from MikroTik Wiki - STP / RSTP:
"STP and RSTP are loop prevention mechanisms for bridges. They dynamically block redundant links."


NEW QUESTION # 28
Router has wireless and ethernet client interfaces, all client interfaces are bridged. To create a DHCP service for all clients, DHCP server must be configured on:

  • A. Every bridge port
  • B. DHCP service is not possible in this setup
  • C. Ethernet and wireless interfaces
  • D. Only on the bridge interface

Answer: D

Explanation:
When you place multiple interfaces (ethernet, wlan) into a bridge, the bridge interface becomes the logical Layer 3 interface. Any IP-related services (e.g., DHCP server, firewall rules) must be applied to the bridge interface, not the individual ports.
* A.#Incorrect - IP services are not bound to physical ports in a bridged setup.
* B.#Incorrect - DHCP works perfectly in this setup.
* C.#Incorrect - The bridge ports are Layer 2; DHCP must bind to the Layer 3 bridge interface.
* D.#Correct - Configure the DHCP server on the bridge interface.
Extract from Official MTCNA Course Material - Bridging and DHCP:
"When using a bridge interface with multiple ports, IP services (like DHCP) must be bound to the bridge itself." Extract from Rene Meneses MTCNA Study Guide - Bridging Concepts:
"DHCP server should be created on the bridge interface if it includes both wireless and ethernet clients." Extract from MikroTik Wiki - DHCP Server:
"Always assign the DHCP server to the bridge interface when clients are behind bridged ports."


NEW QUESTION # 29
What is the address range of a Class B network address in binary?

  • A. 10xxxxxx
  • B. 0xxxxxxx
  • C. 01xxxxxx
  • D. 110xxxxx

Answer: D


NEW QUESTION # 30
......

The MikroTik MTCNA exam questions of ActualTestsIT mainly come in three formats: MikroTik Certified Network Associate Exam (MTCNA) dumps PDF, Web-Based MTCNA Practice Exam and Desktop MikroTik Certified Network Associate Exam (MTCNA) Practice Test Software. With thousands of satisfied customers, you can start your preparation for MikroTik Certified Network Associate Exam (MTCNA) certification with ActualTestsIT.

Cheap MTCNA Dumps: https://www.actualtestsit.com/MikroTik/MTCNA-exam-prep-dumps.html

Report this page